Alarm malfunction reported in attic in Wyckoff
Fire & ArsonFire crews responded to an alarm from a heat detector in an attic. They found that the alarm was caused by a loose device and there was no fire.
Audio|Source: Wyckoff Fire and NORCON
01:34
Transcript:
advance that command to communications. Go ahead. Crews from Engine 4X have done investigation. They found a heat detector in the attic that had come loose for an alarm malfunction. You can release Engine 5 at this time. We're going to stay unseen with Engine 4X to get information. (name withheld), 459. 741.41. Can you clear that New Jersey, Gulls, 62, PICA, Daniel, evicted. All right, it's back in, a long reset. (name withheld), back in, zero five. 02. Vantaf command communication. Go Firecum. Firecum. You can show Vantaf terminated. Engine 4 has gotten information. Again, as stated previously, it was an alarm malfunction. All crews have picked up and has after command and termination. Preachy command termination of Title I[1].
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Title I: False Alarm
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Wyckoff, NJ
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
