Fire alarm activated at regional airport HVAC system, Shelby NC


Fire units responded to a commercial fire alarm at Cleveland County Regional Airport triggered by an HVAC smoke detector. Engine 22 was sent to confirm the alarm, and other responding units were then canceled.
Audio|Source: Cleveland County, Shelby, and Kings Mountain Fire
02:17
Transcript:
00:00
Tenetton, Shelby Station 2 and Shanghai Fireman, Commercial Fire Alarm, near College Avenue.
00:05
Station 2 and Shanghai, Commercial Fire Alarm, near College Avenue, we at Cleveland County Airport,
00:11
showing an HVAC smoke detector.
00:15
Turning to Shelby Station 2 and Shanghai Fireman, Commercial Fire Alarm, near College Avenue.
00:21
Shelby Station 2 and Shanghai,
00:23
Commercial Fire Alarm, near College Avenue, be at Cleveland County Airport, showing an HVAC smoke detector.
00:31
Engine 22 is en route.
00:34
Engine 22. engine 262 en route.
00:37
Shanghai Unit.
00:39
Shanghai Unit checking en route.
00:41
Engine 262.
00:43
Jim, one.
00:49
Right.
00:52
Liner 25.
00:57
Battalion won't respond.
01:04
In form of the battalion.
01:05
All units respond to college after it's going to be the Cleveland County Regional Airport.
01:10
It's showing a smoke detector of H-back.
01:30
22 can proceed on and confirm and all other units can cancel and clear.
01:35
24.
01:37
So region 272 clear.
01:40
262.
01:43
25's clear.
01:44
25. 25.
01:47
Okay, 50's right in the water trap.
01:50
Reason one.
02:01
All units en route near College Avenue with the exception of engine 22, 1022.
02:07
All units en route near College Avenue with the exception of engine 22, 1022.
02:14
Engine 262, no saying got clear.
02:16
Ten, four.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Shelby, NC
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect