Fire alarm triggered by dryer humidity at office building, Roseville MN
Fire & ArsonFire crews responded to a commercial office building near Hamline Avenue for a fire alarm. The building was partially evacuated. The alarm was caused by humidity from a dryer, not by fire. Crews ventilated the area and reset the system.
Audio|Source: Saint Paul Fire
01:48
Transcript:
00:00
Arriving near Hamline Ave N, you have a small single-story commercial office structure.
00:07
No signs of smoke or fire from all four sides.
00:10
Building partially evacuated.
00:14
You can show Battalion 2606 in Command Engine 631 with the investigating company.
00:22
Copy Battalion 606, on-scene small, single-story commercial office structure outside no smoke, all sides,
00:29
partially evacuated.
00:31
Battalion 606 in command the engine 631 investigating at 935.
00:42
631 from 606.
00:43
The unit in question is Unit C, near Hamline Ave N, Unit C.
00:52
I'm going to be a...
00:56
Ladder 7, 9.30 Geranium Avenue East, Life Prep, Public Service, Cross Streets, Mendoza Street, and Forest Street, Box 617, on FireUps 5, Time 937.
01:10
Ladder 7, 930 Geranium Avenue East, Life Prep, Public Service, Cross Streets, Mendoza Street, and Forest Street, Box 617, on FireOps 5[1], Time 937.
01:24
Command permission 631.
01:26
Go ahead, 631.
01:31
Alarm is activated by dryer down here, producing a lot of humidity.
01:37
We're trying to ventilate it right now as well as reset the alarm.
01:42
Command copies, alarm activated by humidity from a dryer, working on ventilation and reset.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
FireOps 5: Fire operations communications on radio channel 5.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Hamline Ave N, Roseville, MN 55113
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
