Fire alarm triggered at reading manufacturing building, Reading PA
Fire & ArsonAn automatic fire alarm activated at a manufacturing building near Stinson Drive. The alarm was likely triggered by unloading a tank. Fire units responded but found no confirmed fire. The property owner provided the pass code and alarm was set to test mode.
Audio|Source: Berks County and Reading Fire / EMS
02:35
Transcript:
00:00
Mesco products near Stinson Drive between Y6 Bridge Road, Cedar Hill Drive for an automatic fire alarm, station 66, station 30, engine 29, ladder 30, engine 66.
00:13
Plain Township, Mesco Products, building 1, near Stinson Drive, crossroad of Wife Bridge Road and Cedar Hill Drive for an automatic fire alarm, alarm possibly triggered by unloading a tank.
00:29
Dirks, 266 in route, near Stinson Drive.
00:36
266, a smoke batching follow on, there'll be a something.
00:46
Appreciate. Dr. Jackson, 266 from now.
00:54
Pension 66 en route 14.
01:01
1459.
01:03
Works, Flander 66 is in the route.
01:04
Clatter 66 is in the route.
01:22
Tension Station 680-0 monitors be advised by City-Metix-1-1-0.
01:27
It's going to be dispatched, Cumer Township 512 East Lancaster Avenue, the shopping center.
01:33
The BLF format and a fault plate.
01:37
1502.
01:40
6202.
01:47
629 for solving.
01:54
Pente 29 copy.
01:57
As in 29 for the Mesco Products are responding, 503, near Stinson.
02:09
266, Perks, Additional Cancel Request.
02:15
Go ahead, Perks.
02:17
They requested to cancel, they stated, (name withheld).
02:23
Provided proper pass code.
02:26
The alarm was set off after unloading the tank, and they are putting the alarms on test due to the issues.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Stinson Dr, Reading, PA 19605
Correct
Incorrect
