Fire alarm triggered by high water pressure and smoke report, Plano TX
Fire & ArsonThis recording is about firefighters responding to a fire alarm at a building. They found water leaking and a high pressure alarm that would not stop. Maintenance was called. Later, a resident reported possible smoke in the building.
Audio|Source: Plano Fire
03:37
Transcript:
Firefighters responded to a fire alarm at 600 Independence Pkwy, Plano. They found water leaking from a drain, and the alarm showed high pressure in section 4. Alarm could not be silenced due to ongoing water flow. Maintenance was notified. Later, a resident reported possible smoke coming from building four.
Firefighters responded to a fire alarm at 600 Independence Pkwy, Plano. They found water leaking from a drain, and the alarm showed high pressure in section 4. Alarm could not be silenced due to ongoing water flow. Maintenance was notified. Later, a resident reported possible smoke coming from building four.
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Independence Pkwy, Plano, TX 75075
Correct
Incorrect
