Residential burglar alarm triggered, cancelled after verification, Pittsburgh PA
BurglaryA residential burglar alarm was triggered by the basement motion sensor near Iroquois Drive. The alarm company contacted the homeowner, who provided the correct passcode and canceled the response.
Audio|Source: Allegheny County Police, Fire and EMS - Southern Areas
02:37
Transcript:
00:00
Residential burg alarm[1] near Iroquois Dr.
00:05
It's coming from basement motion.
00:11
43 from this point.
00:14
43 from this point.
00:17
38, copy.
00:26
2449.
00:35
Myself and 42 will be doing a lufford check on the Montor Trail campground.
00:41
I'm finding 4th Road.
00:54
See one or two.
00:57
You can go ahead and add us to the Parkside Drive detail on Elizabeth Township.
01:09
Callie Minix 7-8-7, on scene.
01:13
On feed, 99.
01:23
Okay.
01:26
Okay. Okay.
01:27
Okay.
01:29
I forgot. I'm supposed to advise you now.
01:32
I had two calls for nonreportable accidents that both were okay with no police response.
01:37
One was 88 at Sarah and one was somewhere else on 88, I don't remember.
01:44
No vehicles needed towed, no injuries, and they both were already supposed to be exchanging.
01:51
Probably, yeah, it's fine, there's no office to hold on.
01:57
Sorry, too,
02:03
they probably out at Lincoln on a walkthrough.
02:06
11-1 and 15, they, uh, evacuation started,
02:16
so just standby out of Lincoln on a walkthrough.
02:17
Thank you.
02:27
Units for the alarm near Iroquois Dr.
02:31
The alarm company called back.
02:32
They spoke with a homeowner that had proper pass code for a cancellation.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Residential burg alarm: Residential burglary alarm
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Iroquois Dr, Pittsburgh, PA 15205
Correct
Incorrect
