Smoke alarm triggered by heat in server room, no fire, Peru IL
Fire & ArsonA smoke alarm was activated in Zone 2 of a commercial building near Venture Dr due to heat in the server room. Firefighters responded but found no visible fire or immediate danger. The heat detector was triggering the alarm because of overheating equipment in the server room.
Audio|Source: Illinois Valley Regional Fire and EMS Dispatch
02:41
Transcript:
00:00
Fire, you are needed for a still alarm, still alarm, at near Venture Dr, 430-70 Venture Dr for an activated smoke alarm, Zone 2, Malcolm, Clear 1636.
00:25
11 train route.
00:33
Valcom, one right-five. Valcom, unray fifty-51.
00:36
Valcom, unray fifty-five.
00:41
Valcom, one-ray fifty-one.
00:47
This is Alcon.
00:48
I hope he hasn't seen a little bit longer and you're ready for status.
00:56
I'll see it a little bit longer and ready for status.
01:06
Allcom, C-2OVing route to target.
01:13
11 from Valcom information.
01:17
3.35 is unseen.
01:21
He advised that there's no fire problem.
01:26
Steve. Stop.
01:29
Salkk, I'm shield 317, a route, target, two on board.
01:39
317 and a route, too.
01:40
Nothing showing.
01:43
All right, see nothing showing.
01:46
All right, see nothing showing.
01:52
Allcom, proceed to is on the same target.
02:08
Thank you.
02:15
11 C2, what do you have?
02:20
C2, we've got an overheating server room.
02:23
It keeps going off from a heat detector.
02:25
They're on phone with their support right now.
02:31
Are you needing me inside or just wait on air in front of it?
02:37
to come in they might need to be advised whether to go inside or watch or not.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Venture Dr, Peru, IL 61354
Correct
Incorrect
