Elevator motor overheats triggering alarm in Pelham building, Pelham NH
Fire & ArsonAn alarm was triggered by an overheated motor in the elevator machine room at a building in Pelham. A slight odor was detected but there was no smoke. The elevator was shut down to prevent damage. The fire alarm control panel was malfunctioning. Security was advised to call technicians to repair both the fire panel and the elevator.
Audio|Source: Pelham Fire and EMS
03:19
Transcript:
00:05
There's an activated detector in the elevator machine room.
00:10
I do have a slight odor,
00:13
no smoke.
00:15
I believe the elevator is not working.
00:22
Recommend shutting power down in the elevator. Something happens here. Overheated or something.
00:29
Received, I kicker, go ahead and shut it down,
00:32
and I will attempt to reset.
02:50
Detector activation, overheated motor in the elevator room.
02:57
The panel is also malfunctioning. I've advised small security that they need a technician for the fire alarm control panel, and they're also getting a tech for the elevator. I'll come through the clear and available command service.
03:12
Security will be notifying a tech to fix all the issues with the elevator. Command terminated is 9 o'clock.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Pelham, NH 03076
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
