Fire alarm activated but found faulty at Oxford building, Oxford ME
Fire & ArsonA fire alarm was triggered on the second floor near Conger Street in Oxford. Fire responders arrived and found the alarm to be faulty. The system was reset, and no fire was found.
Audio|Source: Sebago Lakes Region and Oxford County Fire and EMS
01:51
Transcript:
00:00
Oxford, RCCA, Rupert Fire, respond to near Conger Street, second floor, outside room 210.
00:07
Cross streets are Exchange Street and Bridge Street.
00:10
B-for-A-A-fire alarm activation, Charlie Level, time of your tone, 1134.
00:20
Runford, Genet 91, Latotrian engine 2 will be en route.
00:28
Copy Runford, fire, you're on route, 1135.
00:30
Runford, Fire, Your Own Root, 1135.
00:36
Run for Fire, Officer, we'll be on, and operations will be tackling Fire 21-Command.
00:46
Copy Murphick Fire, you're on scene, 1136.
00:54
Oxford, say, 656.
00:59
Go at 656?
01:02
Out of Steven.
01:06
656, out of Stevens, 1138.
01:09
This is Naples Marine 3.
01:12
Naples, Marine 3.
01:14
Go ahead.
01:16
Marine 3 is off duty.
01:17
Thank you.
01:20
I'll copy it, Marine 3, off duty.
01:33
ORC from Rufford Fire Command.
01:35
Go ahead, Runford, Fire Command.
01:41
Found a faulty alarm, system's been reset.
01:44
We'll be clearing momentarily.
01:47
Copy the Munford Fire Command.
01:49
Faulty alarm clearing shortly, 1145.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Oxford, ME
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
