Fire alarm triggered by detector issue in unit 306


A fire alarm went off in a utility closet due to a detector issue, but no fire was found.
Audio|Source: Nashua Fire Rescue Ch 1-8
00:42
Transcript:
00:0011[1].00:0211[1] in service.00:07Okay, 11[1] you're back in, 1624.00:10It's a bridge for a home.00:17Hello, minutes.00:21We confirmed the detector in the utility closet 306.00:25That's back in all.00:27Systems can reset, all zones have been restored, command will be terminated.00:33Okay, commands can confirm the detector issue in Unit 306, systems reset,00:40and normal command sermon 1628.
00:00
11[1].
00:02
11[1] in service.
00:07
Okay, 11[1] you're back in, 1624.
00:10
It's a bridge for a home.
00:17
Hello, minutes.
00:21
We confirmed the detector in the utility closet 306.
00:25
That's back in all.
00:27
Systems can reset, all zones have been restored, command will be terminated.
00:33
Okay, commands can confirm the detector issue in Unit 306, systems reset,
00:40
and normal command sermon 1628.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
11: Unit In Service
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Nashua, NH
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect