False alarm at john street building, Middletown NY
Fire & ArsonFire units responded to an automatic fire alarm near John Street. Upon arrival, no fire or smoke was found. The alarm was silenced but could not be reset due to missing code. The building owner contacted security to obtain the code, and the system was later reset with no active fire.
Audio|Source: Northeast Orange County Fire (Battalion 3 Area)
02:30
Transcript:
00:00
Automatic alarm.
00:01
Near John Street.
00:04
Automatic alarm,
00:07
Near John Street.
00:08
The zone is going to be first floor hallway.
00:16
Up Williams Street.
00:31
John.
00:37
Our four is on scene command.
00:39
It's going to be a three-story ordinary, nothing showing active alarm.
00:44
It's on scene command, three-store ordinary, nothing active showing alarm only.
00:48
Dispatch?
00:54
For a building rep on this building?
00:57
We're up on this building.
01:00
In fact information.
01:05
The alarm is silenced.
01:07
There's an enunciator panel here that we were able to silence the alarm, but there's no code to reset it.
01:12
So we'll need to code to reset the alarm.
01:17
Has been silenced, no code to reset alarm.
01:30
The engine threes in service returning to fire headquarters.
01:51
Fire headquartered.
01:52
The building owner, he says (name withheld) doesn't know the code, he's getting contact with global security to try to get it from them.
02:06
So it's going to be all reset.
02:11
However, if they get that code, we'll have it for future use.
02:17
They get the code, we'll have a injury.
02:25
Purn food on the first floor, trunk line ventilated, the alarm system is reset, command terminated car port and service.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
John St, Middletown, NY 10940
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
