Residential fire alarm activates with no visible smoke or fire, Indian Trail NC
Fire & ArsonA residential fire alarm was activated near Courtfield Drive in Monroe, North Carolina. A caller reported hearing fire alarms but confirmed that no smoke or flames were visible at the scene.
Audio|Source: Union County and North Carolina State Fire
01:33
Transcript:
00:00
Point four, Residential Fire alarm, near Courtfield Drive, cross-streets whispering wind lane and Brandon Oaks Parkway, operate on Bravo.
00:10
Point four, residential fire alarm, near Courtfield Drive, cross-street whispering windling and Brandon Oaks Parkway, operate on Bravo.
00:26
They got on ladder 4-1 for 5.
00:29
2.4-4-1.
00:33
You can cancel the ladder 4-4 if they're owner.
00:37
10-4[1] they're not.
00:43
2-2 in Ralph.
00:45
10-4[1].
00:50
Engine 41, Engine 202, Letter 41, Quint 4, you're responding to a non-commercial fire alarm.
00:57
Near Courtfield Drive, cross streets, whispering wind lane for the next parkway.
01:02
It's going to be a first-party caller advising that there are fire alarms going off.
01:06
Those flames are smoke are visible.
01:11
I'm known exactly where it's coming from.
01:12
Your hydrant's going to be in front of 5320 and 5316 Courtfield.
01:20
Lane and Brandon Oaks Parkway, operate on Bravo, Battalion 1, Residential Fire Arm, near Courtfield Drive, cross-streets whispering wind rain and Brandon Oaks Parkway, operate on Bravo.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment / OK
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Courtfield Dr, Indian Trail, NC 28079
Correct
Incorrect
