Fire alarm caused by sanding at hotel in greensboro, Greensboro NC
Fire & ArsonA fire alarm was activated at a hotel near Cedar Park Road, Greensboro. Emergency responders found no fire. The alarm was triggered by sanding work at the site.
Audio|Source: Guilford Metro Fire
01:10
Transcript:
00:00
Engine 11, engine 7, and ladder 11.
00:04
Near Cedar Park Road.
00:06
Fire alarm.
00:07
Cross streets are East Gate City Boulevard and Bridgepoint Road.
00:11
TAC Alpha 8.
00:12
All units responding to Cummins Street, you can return to service or you have command on scene, with the exception of Inters 7, truck 7.
00:25
Morning.
00:27
Taria 4!
00:29
Alright, blast off the North Bad back to Nash.
00:32
Dispatch number is the same, about 30 minutes in route, two hours of fuel on board.
00:38
Copy, sir, we have no known traffic.
00:44
To find is peak resources at 215 College Street, Room 408, Ciboy.
00:52
This is North Main Street and Oneida Street, 6 Charlie 1, bring the difficulty to attack 1.
00:59
8, engine 7, engine 11.
01:04
Ladder 7 advice were never up here earlier.
01:06
There was somebody doing some sanding, and that's what's setting the alarm off.
01:09
This is probably a result.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Holiday Inn-Greensboro-East, 3111 Cedar Park Rd, Greensboro, NC 27405
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
