Residential fire alarm triggered by smoke detector, Granite Falls NC
Fire & ArsonA residential fire alarm went off near Northwest Kent Avenue due to a hallway smoke detector activation. No fire was confirmed, and the alarm was later turned off by the alarm company. Most fire units were canceled except for one engine that remained on site.
Audio|Source: Caldwell County Public Safety
01:34
Transcript:
00:00
County Fire to one north fire, have a residential fire alarm, near Northwest Kent Avenue.
00:10
County Fire Tool, North Fire, have a residential fire alarm.
00:13
Near northwest Kenton Avenue, your cross street, northwest Wilson Street, northwest Westbrook Street.
00:19
It's a Zone 1 hallway smoke detector fire alarm.
00:22
Time up 12.06.
00:29
County fire, engine-bury, ladder one, and route.
00:35
Engine 3, ladder one, temple.
00:45
County Fire all one or units in route to Stann Avenue.
00:48
The alarm companies call back, advises they forced off alarm.
00:52
Your discretion.
01:00
County, you can cancel all units except for the engine three.
01:06
The county show engine three on thing.
01:15
Injury temple.
01:23
One temple.
01:26
Correst you want in service.
01:30
Ladder one in service.
01:31
Ladder one in service.
01:33
Ladder one, temple.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Kent Ave, Granite Falls, NC 28630
Correct
Incorrect
