Storage building fire with smoke reported near Riverpoint Road, Elm City NC
A fire broke out in a two-level storage building near Riverpoint Road in Elm City. The building was fully involved with smoke visible, and there was no one inside at the time.
Audio|Source: Nash County EMS Dispatch - Digital
01:42
Transcript:
00:00
NASA Station 4, Stakelum,
00:02
Station 15, MS1,
00:04
District 221, structure fire,
00:07
near Riverpoint Road.
00:10
Near Riverpoint Road, Elm City, cross street,
00:13
East, (number withheld).
00:15
The response 1445, tag 3.
00:22
I see the air route.
00:28
Inborn route.
00:29
Region 112 around.
00:33
Did 1 151 around?
00:39
Riverpoint Road, you respond to a structure fire called by (name withheld).
00:43
It's going to be a two-level storage building, not connected to a structure.
00:49
There's no one inside, same.
00:52
It is a working fire[1] on both levels.
00:59
Is it?
01:05
Riverpoint Road.
01:11
Riverpoint Road.
01:13
Deputy in the area advised that there is smoke showing from the structure.
01:16
Smoke is showing.
01:20
Smoke is showing.
01:24
MS5 central meeting right next.
01:26
Kempore MS5 in right next.
01:33
To doermount, 6 is Act 3.
01:39
4. On scene, subject can be in fully evolved.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
working fire: Confirmed active fire incident requiring full fire response
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Riverpoint Rd, Elm City, NC 27822
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect