Carbon monoxide detector activated due to furnace gas leak, Ellicott City MD
A carbon monoxide detector was activated near Rossini Ln. Emergency responders found a gas leak from a burner jet on the furnace. Power and gas were shut off to secure the area. Further inspection showed the leak was at a burner connected to two jets. Follow-up with a plumber is planned.
Audio|Source: Howard County Fire Dispatch
01:4
Transcript:
00:00
3-1 respond near Rossini Ln, CO detector activation alpha 2, 1743.
00:08
Found the source.
00:13
We're going to be securing it now.
00:14
We don't have a really good unit identifier up here.
00:17
The largest unit on the roof, we're kind of in the center of that occupancy.
00:21
It looks like we have a leaky jet on the furnace.
00:27
Okay, I understood.
00:33
Power and gas have been secured.
00:36
All right, is the leak on the piping itself or in the furnace?
00:43
So it has two lines that come in.
00:46
They both go to two separate jets for the furnace,
00:50
and it's the jet on the left.
00:52
It kind of branches off into about eight burners,
00:55
and it's the burner all the way on the right that's leaking.
01:01
All right, I'll have the sweet eye to see follow up with the plumber.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Rossini Ln, Ellicott City, MD 21042
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect