Fire alarm triggered with no confirmed cause, Delaware City DE
Fire alarm was activated at a multi-residential building on Washington Street. Fire crews investigated and found no cause for the alarm activation.
Audio|Source: NCC Fire/EMS Countywide
02:23
Transcript:
00:00
Tyne II responding in arrival,
00:02
six-story, multi-residential,
00:05
nothing visible from all the sides.
00:08
I have watched this straight to the end.
00:12
Receive the time too.
00:14
Please want to trust to our race company.
00:17
Receive to enter one.
00:23
My heart to respond.
00:25
We're up.
00:27
Receive letter,
00:29
too.
00:34
I would be able to...
00:35
Okay.
00:37
See attention, too.
00:39
Can I have a fireboard? Tell you the channel question of that.
00:43
Uh, CER5, channel 5.
00:46
The panel 5.
00:49
The panel is indicating expense detector outside of the floor front.
00:54
Command.
01:24
6.4.2429c. Polverture out of every weekend.
01:33
V18.
01:35
Were you able to make access?
01:42
Hi, that.
01:44
All right,
01:47
Joe's recommendation.
01:49
Detector outside 405 activated; no reason for activation.
01:53
All right, let's call the alarm company.
01:58
Take a look at the table at the back there should be a key.
02:03
There is no reason for activation confirmed a detector outside of 405.
02:10
Washington Street Command for our board.
02:13
Washington Street Command.
02:15
200 Washington Street, under control.
02:18
No reason for activation found.
02:21
Using the process taken up, the Tyne 2 is available.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Washington St, Delaware City, DE 19706
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect