Fire alarm triggered by construction with no fire found, Daytona Beach FL
Fire & ArsonA fire alarm was activated near Brentwood Drive due to construction work, but no fire or hazard was found. The fire system was inactivated and units cleared after verification.
Audio|Source: Volusia County Fire and EMS
02:2
Transcript:
00:00
It looks like it's an alarm due to construction, but it says cannot ask for a cancel.
00:06
Are we canceled or are we going to continue route?
00:27
Engine 96 Central.
00:32
The call, depending on the call on near Brentwood, if you have any other engine or engine one responding, you can cancel them since we're back in service.
00:44
Angel 1 distress, please copy.
00:46
Now you show us the service.
00:57
Engine 9-6-Central.
01:01
This got notified for a far-long, near Brownwood.
01:06
That was the address that we just cleared.
01:09
To clear all units, I recall.
01:11
We're back in service.
01:13
I copy, thank you.
01:19
Agent one, just got you, copy.
01:21
We were at service.
01:23
That's for new.
01:31
Middick 61 and 62 testing 121 Lowell Water Street Department A Alpha and Deltona, cross-reys of Beltona Boulevard and Bell Tower Avenue, select Tax 3.
01:41
9651, 962 select type 3, at Mount 916.
01:45
Okay, anyone.
01:47
I spoke with engine 96.
01:49
It said the pole station for near Brentwood is broken.
01:53
They inactivated the system.
01:55
If you get any more fire launch to that location, we're not going to respond unless there's smoke or flames soon.
02:00
We're going to FSI for training.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Brentwood Dr, Daytona Beach, FL 32117
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
