False fire alarm at residential building on South Wabash, Chicago IL
Fire & ArsonFire department responded to a fire alarm at a residential building near South Wabash. No fire or smoke was found during the investigation. The alarm was caused by a system malfunction. The department returned to service after confirming there was no danger.
Audio|Source: Chicago Fire - Digital
01:15
Transcript:
00:00
And joining the truck are at near South Wabash, 8-story residential, nothing showing.
00:05
We're southbound on the automatic alarm[1].
00:07
Truck 20, you're on the engine and a truck on the scene.
00:09
No to truck 20 are being held by the ample return.
00:12
Battalion 4 is on the scene near South Wabash.
00:16
We have a 7-story residential.
00:21
I've been showing at this time 200 by 100.
00:29
The Italian's four to Maine.
00:31
Companies investigate it.
00:32
There's nothing on the panel.
00:34
They checked both the one at the door and the one on the back.
00:38
They've had problems with the system.
00:40
We're going to be in service returning.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
automatic alarm: Automatic fire alarm activation
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near S Wabash Ave, Chicago, IL 60605
Correct
Incorrect
