Fire alarm caused by malfunctioning detector in housing building, Buffalo NY
Firefighters responded to a commercial fire alarm at near Clinton St in the housing area. They investigated the alarm located on the sixth floor and found it was caused by a malfunctioning heat detector. No fire or hazard was found.
Audio|Source: Buffalo Fire
03:36
Transcript:
00:00
A preliminary signal, engine 32, engine 1, ladder 2, and B43, level 2 response[1] to number near Clinton St between Grattolm’s Boulevard and Jefferson to investigate an activated commercial alarm.
00:11
A preliminary signal, engine 32, engine 1, ladder 2, B43, level 2 response[1] to near Clinton St at the housing to investigate a zone 993 alarm activation time, 1127, bus to fire.
00:42
22 respond to the MESH unit.
00:45
Number 50 Coons, say Broadway and Empire.
00:48
That's for an ill female.
00:52
22 responds in the MESH unit.
00:55
Number 50 Coons, three Broadway and Empire, for an ill female.
01:00
Time, 1130 hours, self-up fire.
01:07
S3-2's on location, near Clinton St, investigating Elton.
01:11
32 on location, near Clinton St, investigating nothing showing.
01:15
Companies be advised, there is a keyholder responding, no EPA was provided.
01:23
Also, engine 32, that alarm is coming from zone 993.
01:34
This dash 32 are you just trying to call me?
01:37
That's a negative engine 32.
01:38
We did say the alarm is coming from zone 993.
01:42
993.
01:44
993, copy.
01:46
993, copy.
01:52
433, lobby.
02:10
4.3, that's a 302 lobby.
02:25
We have a lines on the 6th floor.
02:28
We're heads up to investigate.
02:30
There are lines on the 6th floor investigating.
02:40
22 on location.
02:43
22 on location.
02:51
B.4-3, truck two.
03:05
Fire dispatch, truck two.
03:11
We investigate the 6th floor.
03:13
The image has our location is a malfunctioning heat detector.
03:17
Truck 2 can handle no hazard.
03:21
Rather, B.43, do you copy letter 2's message?
03:30
Letter 2 dispatch copies that the malfunctioning heat detector on the 6th floor.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
level 2 response: Elevated response level requiring additional units or resources beyond the standard initial deployment.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Clinton St, Buffalo, NY 14204
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect