Fire alarm triggered by system testing at commercial site, Buffalo NY
Fire & ArsonA fire alarm at a commercial building near Adams Street was activated due to system testing. The alarm was accidental and no fire hazard was found.
Audio|Source: Buffalo Police, Fire and EMS
01:17
Transcript:
00:00
For an activated commercial fire alarm number 70 on Adams Street, that's between Clinton and Howard.
00:04
Let's go for engine 3, engine 1, letter 2, and B4 3.
00:08
Subminary signal for an activated commercial fire alarm number 70 on Adams Street.
00:12
That's between Clinton and Howard, scope for engine 3, engine 1, letter 2, and B4 3.
00:16
Timeout, 1040 hours off a full fire.
00:23
He's calling on, Howard.
00:26
B-4-3.
00:28
You're responding.
00:30
Number 70 on Adam Street, that's between Clinton and Howard.
00:32
Alarm company report a zone 1, fire, hallway, smoke detector, activation.
00:35
You have a PS.
00:41
Can you put me out at (number withheld) Bracken Ridge or a suspicious vehicle? I'll be outside.
00:47
That's clear.
00:48
To snatch 4-3.
00:55
Dispatch 4-3.
00:57
B-4-3.
01:00
7-0 Adams, 2.5-story wood frames, duplex.
01:04
They're testing the system as an accidental trip.
01:06
Pick up the company's editor 3's got the report.
01:08
4-3 is in.
01:10
Brought report 3, 70 on Adam Street.
01:11
They were testing the systems.
01:14
No hazard.
01:15
Entry will handle the remainder, take the report.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Adams St, Buffalo, NY 14206
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
