Fire alarm triggered by construction dust and accidental activation, Barnstable MA
A fire alarm was triggered at a commercial building on Main Street due to construction dust and accidental activation of a pull station. Fire crews investigated and found no fire.
Audio|Source: West Barnstable Fire
04:31
Transcript:
00:00
Receive Cartoon, you're on responding, 1919, Main Street.
00:26
Car 2 from West Brunsville Fire.
00:33
Go ahead.
00:36
The alarm company just called in another fire alarm for this location,
00:40
pole station, West Wing rear pole.
00:46
Okay.
00:49
Okay.
00:53
What charge will fire, engine one, one with three.
00:59
Engine one on with three.
01:22
Thank you.
01:44
POMAYOR.
02:10
I'm going to be.
02:33
Westmarsall fire car two on location one and a half story wood frame commercial nothing show from the X area be investigating car two has command
02:49
Received car 2 on location, one and a half storywood frame, commercial building, nothing's showing you're investigating, and car 2 has command.
02:59
Fire alarm, engine 1, on location.
03:19
Received engine one on location.
03:29
Man, what's forward would you like?
03:32
First floor, accidental trip.
03:52
Response, fire from command.
03:56
Answering command.
04:01
Just from construction set off the detector, and they also pulled the pole station, which is the reason for that.
04:07
We'll be resetting the alarm, engine once available on location.
04:23
Receive car 2, dust from construction is what caused the alarm.
04:28
You're going to reset the alarm and engine 1 is available on location.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
