Fire alarm triggered by wind with no access at gated property, Arroyo Grande CA
Fire & ArsonResponders attempted to access a fire alarm triggered at a gated property in Arroyo Grande but could not enter because the gate code did not work. The alarm was likely set off by the wind.
Audio|Source: Arroyo Grande Police and Fire
00:55
Transcript:
00:00
Multiple units x32 copy.
00:04
X-ray 20, go ahead.
00:07
X220, fire advising of a possible gate code at near 6247.
00:16
X2407.
00:17
X220, copy.
00:18
We'll try that.
00:26
22, X220.
00:30
Extra 20 negative on that gate code working.
00:35
The alarm's going off looks like the wind with the door open.
00:40
However we can't make access.
00:42
There's no way to get past the gate.
00:46
We have to be in the lake to get over there.
00:48
So we're not going to be able to get over here.
00:53
X210-4, confirming showing 10-8[1].
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-8: In service and available to respond to calls.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Arroyo Grande, CA 93420
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
