Two-vehicle accident blocks traffic at Hillside Road
TrafficA traffic accident with two vehicles occurred at the intersection of Hillside Road and McKenna Square, causing a blockage. Emergency services are responding because one person cannot exit their vehicle.
Audio|Source: Amarillo Police and Fire
01:24
Transcript:
Go ahead. 407. Here the Ophastair on the front end on the accident at Hillside of McKenna. Cleaver 46 in Washington. Line 2 is in route, 250, hillside of McKenna. 24 ladder 2, tacked you. 10-13[2] route. 15 route. 3-16-12 tacked you. I'm going to log out and log back in a 6-1. Letter 2, Engine 13, Hillside Road and McKenna Square. Hillside Road and McKenna Square. Priority 1[3] vehicle accident involving two vehicles, blocking traffic. EMS is not attached. Respondect you. 36, 23. Clear. Ladder 2 is clear. 10-4[1]. 2, Engine 13 be advised possible and Trout, call or advise, unable to exit vehicle. Thank you. Good. Well, Patch, this is a letter, too. Can you go to get TMX and Rout priority 3? 104.104.104.104.104.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgement/Message Received
[2]
10-13: Weather/road report (sometimes used for 'officer needs help')
[3]
Priority 1: High priority emergency
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Hillside Rd & McKenna Square, Amarillo, TX 79119
Correct
Incorrect
